OCS with ISCC - vol.II

There is on our forum this topic: http://www.sggu.com/smf/index.php/topic,7084.msg30533.html

Question to cavagnaro:
What is ANI and DNIS on OXE side in EventRinging on agent place? I suppose DNIS is equal to number of external routing point. But what about ANI?

I have similar setup, but with TServer/OXE/VAD outbound dialing and SIP Agents in case of success call. The problem is that ANI in EventRinging on SIP side equals to PSTN trunk name on OXE side. Besides attached data on SIP side there isn’t any information about dialled customer number. Without additional setup this causes problems with NICE recorder connected to both TServers.

Question to everyone:
Do you know if there is a possibility on OXE side, to pass dialed number in initial INVITE message? Or override ANI during ISCC transfer?

Problem partially resolved. If I receive CONNECTED_NUMBER in DSS1 signaling, then with Outbound Caller ID functionality on TServer A4400(CPNDigits) side, on TRouteCall I’m able to override ANI presented to SIP Server.

If I receive empty CONNECTED_NUMBER (this happens in small amount of calls), then AttributeANI is successfully overrided, unfortunately AtributeOthedDN on SIP side equals ‘anonymous’ string.

Which Genesys versions are you running?

Enviado de meu E6633 usando Tapatalk

In general - the newest (almost). TServer A4400 8.1.6, SIPServer 8.1.101, OCS 8.1.5.