Scenario: SIP server connected with mediant. Need to make a call from SIP extn to mediant and send that call back to another SIP extn (same SIP server)
Any pointers would be helpful.
Hi there!
It’s there simple task.
- create outbound trunk or Extension DN that point to Mediant
- On Mediant create translate rule to rewrite destination number from dialed by your agent to new internal number
3 On Mediant create routing rule to route created number to you next SIP server.
WBR.
1 Like
Hi Timur,
Thanks for the input. Am new to Mediant. I understand the SIP configuration (pt.1). Can you help me where exactly the rules to be defined in Mediant? Also, in this case of loop back, do I need to connect the trunks using RJ48?
1 Like
well, coz mediant did’t have abiliti to pass-throgh sip2sip conversation you may need create an external hardware loop to connect 2 pstn ports together.
1 Like
Hi Timur,
I have connected loop back connector from trunk1 to 2. Channels are now in active state. But when call is made (trunkphonenumber@GW-IP:5060), am getting the response for INVITE message as 486 Busy Here (cause=3) 
Am now trying to make a call from one SJphone to GW and receive the call in another SJPhone (SJPhone setup in 2 different IPs).
2 Likes
check the hardware options - especially network timer source
check the routing and translate rule
try to debug the call